Technology

What is PDLC? How smart glass and smart film work

Smart glass, smart film and PDLC liquid crystal film explained simply: how it works, power use and limits. A guide for Switzerland.


At a glance. A PDLC film is a thin layer in which millions of tiny liquid crystal droplets are dispersed in a polymer. With no power, the droplets point in random directions and the glass looks white and opaque. With power, they line up and the glass turns clear. “Smart glass” is glass with this effect built in; “smart film”, or switchable film, brings it to glass that is already installed. Because it contains liquid crystals, it is also called LCD film.

On every site visit there is a moment when the conversation changes. We hold the sample against the glass, press the switch, and the clear partition turns as white as rice paper. Then clear again. Nobody asks whether it works any more. The question becomes how it works, and whether it suits this particular glass. This guide answers both.

Three names for the same idea

Anyone researching the topic comes across several terms, often used interchangeably. It helps to put them in order.

Smart glass, also called switchable glass, is glass that changes its appearance on command. It can be made that way at the glassworks, with the film sealed between two sheets of laminated glass. It is the typical solution for new builds, when the windows have yet to be ordered.

Smart film, or switchable privacy film, is the same technology as an adhesive film applied to existing glass. It is the simplest route when the glazing is already in place and nobody wants a building site.

PDLC (Polymer Dispersed Liquid Crystal) is the name of the most widespread technology for achieving the effect. Because it contains liquid crystals, like a screen, it is also known as LCD film or liquid crystal film.

What happens inside the film

A PDLC film is built like a sandwich. On the outside are two sheets of clear polyester, each with an extremely thin conductive coating. In between is a polymer holding microscopic droplets of liquid crystal.

When the film is switched off, the crystals in each droplet point in random directions. Light passing through is deflected thousands of times and comes out scattered: the glass looks milky white. It hides what is behind it but still lets light in.

When an alternating voltage is applied between the two conductive layers, the crystals all align in the same direction. In that position, light passes through them almost without deflection and the glass turns clear. Switching takes a fraction of a second: for our zoned films, the data sheets give response times of around 200 milliseconds.

This leads to a feature that surprises many people: a PDLC film only draws power when it is clear. According to our suppliers’ data sheets, our films stay below 5 W/m². Vista Classic, for example, is rated at under 4 W/m².

From the lab to everyday glazing

PDLC technology emerged in the 1980s from liquid crystal research. For a long time it remained expensive and reserved for a handful of prestige projects: the films were less clear, did not last as long, and the price per square metre put most people off.

That has changed in recent years. Production has matured, the films are clearer and more durable, and fitting them to existing glass has become standard practice. The car industry now uses the same family of films in panoramic roofs, as we explain in our article on PDLC panoramic roofs. For anyone deciding today, the message is simple: this is no longer an experimental technology.

No single film suits every glass

The PDLC label covers very different products. Clarity, sun resistance, colour and resting behaviour vary from one film to the next, and this is where a project succeeds or fails.

Vista Classic is the clearest film in our range: 95.2% visible light transmission and haze of no more than 1.8% when switched on. It is designed for interiors, where it matters that the clear state really looks like glass: meeting rooms, partitions, doors.

Vista Clear, by contrast, is made for sun-exposed glazing. When clear it lets through 91% of light; when opaque it rejects more than 86% of infrared radiation, the part that carries heat.

Vista Colors adds colour: Black and Grey are the film itself, while the other tints come from a coloured film applied on top. The Black version offers one-way privacy.

Smart Vista is divided into separately controlled zones: bands, logos, a venetian-blind effect.

Vista Reverse uses PNLC technology and works the other way round: it is clear at rest and only draws power when it turns opaque. It is the right choice for glass that should stay clear almost all the time, such as a shower. It is also for interiors only.

What a PDLC film does not do

Knowing the limits avoids disappointment. It is the part sellers tend to skip.

It does not black out a room. In its opaque state the film is white and translucent: it blocks the view, but light still passes. To darken a bedroom or a screening room you need a different technology, the DLC film Vista Eclipse.

It does not behave the same on every glass. Sun-exposed glazing and showers need different versions. It can also be fitted to curved glass, but every pane is checked first.

It is not a blackout blind against summer heat. It reduces infrared and almost all ultraviolet radiation, but does not replace external shading where the sun is very strong. If all you need is sun protection, a static solar film such as Vista Solar costs less.

How to choose: three questions

Even before price, three questions guide almost every choice.

Is the glass indoors, or does it get direct sun? Indoors, Vista Classic offers the highest clarity. In the sun, you need Vista Clear or Vista Colors.

Should the glass be clear almost all the time, or opaque almost all the time? In the first case, Vista Reverse only draws power during moments of privacy. In the second, a standard PDLC film is the right fit.

Where is the power? The film needs a small power supply near the glass. We check this on the site visit, together with the type of control: switch, remote, app or home automation.

How it is installed

The film is made to measure for each pane. On installation day the glass is cleaned, the film applied and the contacts connected to the power supply. Frames are not removed and no building work is needed. That is why we bring a sample to the site visit first: it is the most honest way to judge clarity and colour on the real glass, in the real light.

Frequently asked questions

What is PDLC?

Are smart film and smart glass the same thing?
The technology is the same. Smart glass is new glass with the film built in; smart film is applied to existing glass.
Are LCD film and PDLC film the same thing?
In everyday language, yes. “LCD” refers to the liquid crystals in the film; PDLC is the technical name of the technology.
How long does a PDLC film last?
Our suppliers’ data sheets state over 2 million switching cycles and 80’000 to 100’000 operating hours, depending on the model. The warranty is 2 years.
Can it be controlled from a smartphone?
Yes, via an app or home automation. We define this on the site visit, together with the power connection.
How much does it cost?
Prices per square metre are shown on each product page. Installation depends on the frame and the glass, and we quote it after the site visit.

Let's talk

Book a free site visit

An estimate is enough. We take the exact measurements.

We use your details to respond to your request, as described in our privacy policy.

What are you looking for?

Try “privacy”, “Eclipse” or “site visit”.

Read the privacy policy