Offices

Privacy film for glass offices: clear when it suits you

Glass meeting rooms, open-plan offices and partitions: how a switchable film combines daylight with discretion, and which one suits each wall.


At a glance. Glass walls bring light and openness to offices, but they also show who is in a meeting and what is on the screens. A switchable privacy film makes the wall opaque only when needed and clear again straight afterwards. For interior partitions the best fit is usually Vista Classic; for screens visible through the glass there is a different solution that needs no power at all.

Over the past twenty years, offices have knocked down their walls. Meeting rooms have become glass boxes, corridors look onto desks, daylight reaches the middle of the building. Workspaces are brighter and more open. And a new problem has appeared: everything that happens behind the glass can be seen by anyone walking past.

The paradox of the transparent office

Anyone designing a glass office wants two things that contradict each other. They want people to see one another, because transparency encourages exchange and makes the space welcoming. And they want certain conversations to stay private, because a job interview, a negotiation or a difficult meeting does not belong in the corridor.

Glass on its own always chooses the first. There are two kinds of exposure, and it is worth telling them apart because they are solved differently.

People. Who is in the meeting, with whom, with what expression. This is the most obvious exposure, the one you notice immediately in a room with clear walls.

Data. Screens, whiteboards, papers on the table. It is less visible but often more sensitive: a monitor facing the corridor shows names, figures and projects to anyone who pauses for a moment.

Why traditional solutions fall short

The classic answer has been frosted film, curtains or venetian blinds. They work, but each takes away something the glass was meant to give.

Frosted film closes the wall for good: it protects even when privacy is not needed, and the meeting room becomes a closed room again. Curtains and blinds block light, gather dust, need cleaning and, in practice, are often left down all day or forgotten open at the wrong moment. Either way, the architecture suffers.

A wall that changes state

A switchable privacy film is applied to the existing glass. With a switch, a remote or home automation, it goes from clear to opaque in a fraction of a second. In its opaque state it is white and translucent: the room stays bright, but nobody can see in from outside. When the meeting ends, the wall turns back into glass.

The physics is explained in our PDLC guide. What matters in an office is the quality of the clear state: a film that looks like slightly hazy glass when switched on spoils the very sense of openness the design was meant to create.

Which film for which wall

Meeting rooms, interior partitions, glass doors. Vista Classic is the clearest film in our range: 95.2% visible light transmission and haze of no more than 1.8% when switched on. It is for interiors only, and it is also the most affordable film in the switchable range. A common mistake is to choose an exterior film for an interior meeting room: you pay more for less clarity.

Glass facing outdoors, exposed to the sun. This calls for Vista Clear, which rejects more than 86% of infrared radiation when opaque and withstands direct sun.

Separate zones or a company logo. Smart Vista is divided into independently controlled sections: you can obscure just the band at eye level, or make the logo appear when the room is in use.

The glass should stay clear, but the screens should not. A switchable film is not needed here. Vista Cloak is a static polarising film: anyone looking through the glass sees the room but cannot read LED and LCD monitors. It does not work with OLED screens. We cover this in our article on visual hacking in glazed offices.

Questions to ask before deciding

Is the glass indoors or exposed to the sun? That determines the version of film and therefore the price.

What needs hiding: people or screens? For people, you need a switchable film. For screens, Vista Cloak is often enough, with no electronics and no cables.

Where is the power? Every switchable film needs a small power supply near the glass. We check this on the site visit, together with the cable route and the type of control.

Who operates it? A switch next to the door is the simplest option. In a building with automation, the film integrates like any other load, for example alongside lighting and blinds.

Frequently asked questions

Privacy film for glass offices

Can the film be fitted without changing the walls?
Yes, it is applied to the existing glass. The site visit checks the type of glass and the cable route.
Can you see through the opaque film in the evening?
In its opaque state the film blocks the view but stays translucent: with strong light on one side, shadows may be visible. We demonstrate this live with the sample on the site visit.
How much power does it use?
Under 4 W/m² for Vista Classic in its clear state, according to the supplier’s data sheet. When opaque, it uses no power.
What warranty is there?
Two years on switchable films, installed by our team with more than 25 years of experience.

Let's talk

Book a free site visit

An estimate is enough. We take the exact measurements.

We use your details to respond to your request, as described in our privacy policy.

What are you looking for?

Try “privacy”, “Eclipse” or “site visit”.

Read the privacy policy